A Bradford company - serving Whitney, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
K
Kohler · Whitney

Kohler Construction Service in Whitney, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Whitney
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
An open kitchen and dining area after a remodel
A whole-home remodel with the living, dining and kitchen areas opened up
A second-story addition that matches the existing roofline
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Whitney Homeowners Choose Kohler Construction

Bradford Remodeling Co Whitney provides independent Kohler fixture service, installation and remodels to homeowners across Whitney, Nevada. We’re not a Kohler-authorized dealer or service center, and we don’t pretend to be. We’re remodeling contractors who work with Kohler product every week, which means we know the model lines in Whitney’s housing stock and where they actually fail.

Call (833) 620-4908

Whitney is unincorporated, so every fixture or bath change that touches plumbing runs through Clark County permitting, separate from what contractors filing inside Las Vegas city limits deal with. Kohler products show up in this community’s 1980s through 2000s tract homes in predictable patterns. We’ll get into those specifics below. Call (833) 620-4908 to talk through your Kohler project and get a written price before anything starts.

Why Trust Bradford Remodeling Co Whitney for Your Kohler Construction?

A tile setter installing wall tile in a shower

Our technicians have up to 22 years of experience working with Kohler fixtures, and they’ve pulled enough Forté and Devonshire cartridges to recognize a scaled valve by feel before the wrench comes out. That familiarity matters on Kohler jobs, because Kohler’s trim and rough-in assemblies have specific retaining clips, cartridge part numbers and gasket sets. The wrong part doesn’t just fail. It fails inside a valve body you can’t easily access without opening a wall.

We use genuine Kohler OEM parts on every supported model. Where a wear item has been discontinued, we source quality aftermarket and tell you plainly which one we’re fitting and why. We never put a knockoff cartridge in a Kohler pressure-balance valve.

Warranty-safe work is part of The Garrison Standard. Our installations follow manufacturer specs so Kohler’s own product warranty isn’t compromised by how we fit it. Every completed project through Bradford also carries the 365-Day Done Right Promise: a full-year written guarantee. If the work fails inside that window, we come back and correct it at no charge. You get a written price before work begins, background-checked and uniformed technicians on the job, and a live person answering the phone around the clock. As an independent contractor, Bradford Remodeling Co Whitney is not affiliated with or authorized by Kohler.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Kohler Construction Problems We Fix in Whitney

Kohler fixtures are well-built, but they meet hard water and desert heat here in ways the spec sheet doesn’t describe. These are the failures we see most.

  • Memoirs and Memoirs Stately toilets running or short-cycling. These gravity-flush suites rely on a standard 2-1/8 in. flapper. In Whitney’s hard, mineral-heavy water the flapper degrades and starts sealing unevenly, so the toilet runs continuously or short-cycles on its fill valve. It’s one of the most common service calls we handle, and the cause is almost always the flapper and fill valve, not the bowl.
  • Underscore and Archer acrylic tubs with slow leaks at the overflow. Both models develop flex or hairline cracking, and the overflow gasket is a frequent failure point. When the drain shoe was set too loosely at install, the gasket ages faster and water seeps into the subfloor invisibly. You notice a soft floor or discolored drywall nearby before you notice the tub itself.
  • Forté and Devonshire shower valve cartridges scaling shut. Kohler’s pressure-balance cartridge stops moving when scale builds up. The handle gets stiff, and the temperature drifts or won’t hold steady. Whitney’s mineral-heavy water accelerates this. The valve body is fine; the cartridge needs replacement with an OEM part.
  • One-piece toilet tank bolts corroding at the tank-to-bowl seam. Kohler’s one-piece models put supply and tank bolts in a spot where mineral scale and moisture combine to corrode them. The result is weeping at the base of the tank that’s easy to miss until it stains the floor or rusts the supply line.
  • Builder-era Kohler fixtures nearing their service life. Many Whitney homes built in the 1980s and 90s still have original Kohler tubs and toilets. These are worth servicing properly rather than replacing outright. But when the acrylic shell is cracked or the tank is compromised, honest replacement beats repair.

Kohler Parts & Our Repair-vs-Replace Approach

A finished basement family room with a media wall and wet bar

Kohler OEM cartridges, flappers, fill valves and trim are what we use where the model is still supported. Kohler’s parts network is reliable and the OEM parts fit correctly. Where a wear item is discontinued, we source quality aftermarket and tell you which brand is going in. We don’t stock Kohler parts locally. Every part is sourced per job, so the one that arrives is the one your valve or toilet actually needs.

The repair-or-replace call is made honestly. On older Kohler tubs and toilets, repair is usually right: a new cartridge in a Forté valve or a fresh flapper in a Memoirs toilet restores the fixture for a fraction of replacement cost. Replace when the acrylic shell itself is compromised, the tank is cracked, or the valve body is damaged. That’s a call we’ll give you in writing before work starts. Call (833) 620-4908 for a free estimate.

A typical job runs like this: a homeowner notices the shower temperature drifting and the Kohler handle getting hard to turn, or the tub drain weeping at the overflow. The usual culprit is a scaled pressure-balance cartridge in a Forté or Devonshire valve, or a loose or aged overflow gasket on an Underscore tub. A qualified local pro kills the water, pulls the cartridge with the correct retaining clip, flushes the valve body, fits an OEM replacement, and re-sets the drain with new gaskets and a leak check before closing the wall.

Our Kohler Service Process – Step by Step

  1. 1
    Diagnosis. We identify the exact Kohler model and series, then test the failure point directly: cartridge movement, flapper seating, overflow gasket integrity, tank bolt condition. No guessing at replacement.
  2. 2
    Written repair plan and price. You get the scope, the part number we’re fitting, and a written price before any tool comes out. The number doesn’t move at the door.
  3. 3
    Repair or install. Water off, correct retaining clip pulled, valve body flushed, OEM parts fitted to manufacturer spec. Trim re-set and torqued properly so it doesn’t loosen later.
  4. 4
    Test. Every valve runs through the full hot-cold cycle. Every drain is filled and checked for weeping at the joint before the wall closes. We don’t sign off until it tests clean.
  5. 5
    Warranty and close. You receive the signed 365-Day Done Right Promise, the site is cleaned and the documented scope is yours to keep.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Kohler Products We Service & Install in Whitney

A walk-in pantry with wood shelving

We work across Kohler’s residential fixture lines:

  • Toilets: Memoirs and Memoirs Stately suites, Villager and Highline two-piece models, and Kohler one-piece designs.
  • Tubs: Archer and Underscore in both soaking and alcove configurations.
  • Shower valves and trim: Forté and Devonshire valve bodies, cartridges, trim kits and showerheads.
  • Faucets and bath fittings: widespread and single-handle lavatory and kitchen faucets across Kohler’s modern and traditional lines.

We install as well as service, which matters if you’re remodeling a Whitney bath and choosing fixtures alongside the plumber. Bradford’s bath work covers full bathroom remodeling, tub-to-shower conversion and walk-in shower installation, with Kohler fixtures spec’d to your layout.

Kohler Bath Project Pricing in Whitney

Service Price Range
Full Bathroom Remodel $9,000 – $28,000
Walk-In Shower Installation $4,500 – $12,000
Tub-to-Shower Conversion $3,500 – $10,000
Shower Replacement $3,000 – $8,500
Bathroom Vanity Installation $800 – $3,000

We Also Service These Brands

Kohler is one line in a broader mix. Bradford Remodeling Co Whitney also works with KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Toto fixtures, among the brands we install. That range means we’re not pushing one brand at you. If a Toto toilet fits your Whitney bath better than a Kohler, we’ll tell you. Specs stay traceable to the manufacturer either way.

FAQs – Kohler Construction Service in Whitney

Book Your Kohler Service in Whitney, NV

Whether it’s a stiff Forté handle, a Memoirs toilet that won’t stop running, or a full Kohler bath remodel in Whitney, we’ll give you the diagnosis and a written price before anything starts. Background-checked technicians, OEM parts, and the 365-Day Done Right Promise on every completed job. Call (833) 620-4908 for your free estimate.

Written by the team at Bradford Remodeling Co Whitney.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA dining nook with a built-in banquetteA home office with a built-in desk and shelvesA remodeled kitchen with a waterfall island and wood cabinetsAn open living space after a whole-home remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Whitney

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Whitney team

A local vetted partner works across Whitney and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 620-4908
Local Service Coverage

Request a Free Estimate in Whitney

Tell us what you need - Bradford Remodeling Co Whitney responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch